The laser-induced damage detection images used in high-power laser facilities have a dark background, few textures with sparse and small-sized damage sites, and slight degradation caused by slight defocus and optical diffraction, which make the image superresolution (SR) reconstruction challenging. We propose a non-blind SR reconstruction method by using an exquisite mixing of high-, intermediate-, and low-frequency information at each stage of pixel reconstruction based on UNet. We simplify the channel attention mechanism and activation function to focus on the useful channels and keep the global information in the features. We pay more attention on the damage area in the loss function of our end-to-end deep neural network. For constructing a high-low resolution image pairs data set, we precisely measure the point spread function (PSF) of a low-resolution imaging system by using a Bernoulli calibration pattern; the influence of different distance and lateral position on PSFs is also considered. A high-resolution camera is used to acquire the ground-truth images, which is used to create a low-resolution image pairs data set by convolving with the measured PSFs. Trained on the data set, our network has achieved better results, which proves the effectiveness of our method.

Segmenting dark-field images of laser-induced damage on large-aperture optics in high-power laser facilities is challenged by complicated damage morphology, uneven illumination and stray light interference. Fully supervised semantic segmentation algorithms have achieved state-of-the-art performance but rely on a large number of pixel-level labels, which are time-consuming and labor-consuming to produce. LayerCAM, an advanced weakly supervised semantic segmentation algorithm, can generate pixel-accurate results using only image-level labels, but its scattered and partially underactivated class activation regions degrade segmentation performance. In this paper, we propose a weakly supervised semantic segmentation method, continuous gradient class activation mapping (CAM) and its nonlinear multiscale fusion (continuous gradient fusion CAM). The method redesigns backpropagating gradients and nonlinearly activates multiscale fused heatmaps to generate more fine-grained class activation maps with an appropriate activation degree for different damage site sizes. Experiments on our dataset show that the proposed method can achieve segmentation performance comparable to that of fully supervised algorithms.

The time-delay problem, which is introduced by the response time of hardware for correction, is a critical and non-ignorable problem of adaptive optics (AO) systems. It will result in significant wavefront correction errors while turbulence changes severely or system responses slowly. Predictive AO is proposed to alleviate the time-delay problem for more accurate and stable corrections in the real time-varying atmosphere. However, the existing prediction approaches either lack the ability to extract non-linear temporal features, or overlook the authenticity of spatial features during prediction, leading to poor robustness in generalization. Here, we propose a mixed graph neural network (MGNN) for spatiotemporal wavefront prediction. The MGNN introduces the Zernike polynomial and takes its inherent covariance matrix as physical constraints. It takes advantage of conventional convolutional layers and graph convolutional layers for temporal feature catch and spatial feature analysis, respectively. In particular, the graph constraints from the covariance matrix and the weight learning of the transformation matrix promote the establishment of a realistic internal spatial pattern from limited data. Furthermore, its prediction accuracy and robustness to varying unknown turbulences, including the generalization from simulation to experiment, are all discussed and verified. In experimental verification, the MGNN trained with simulated data can achieve an approximate effect of that trained with real turbulence. By comparing it with two conventional methods, the demonstrated performance of the proposed method is superior to the conventional AO in terms of root mean square error (RMS). With the prediction of the MGNN, the mean and standard deviation of RMS in the conventional AO are reduced by 54.2% and 58.6% at most, respectively. The stable prediction performance makes it suitable for wavefront predictive correction in astronomical observation, laser communication, and microscopic imaging.

对溶液化发光层成膜参数及电子传输层浓度进行调控，优化发光层成膜效果及器件发光性能，同时使用导电聚合物聚（3，4-乙烯二氧噻吩）-聚苯乙烯磺酸（PEDOT：PSS）作为透明阳极，刮涂导电银浆作为阴极，通过全溶液法制备了高效率的OLED。研究发现，发光层成膜参数的调整有效改善了其成膜效果。且适当的电子传输层材料浓度可以改善器件的载流子注入平衡，有效降低阴极的功函数，提高器件的发光性能；酸后处理的PEDOT：PSS薄膜导电性大大提升，在可见光范围的透过率与ITO相当。全溶液制备的发光器件最大电流效率为1.441 cd/A，与以ITO为电极的器件相比，增加了近50倍。

In-situ laser-induced surface damage inspection plays a key role in protecting the large aperture optics in an inertial confinement fusion (ICF) high-power laser facility. In order to improve the initial damage detection capabilities, an in-situ inspection method based on image super-resolution and adaptive segmentation method is presented. Through transfer learning and integration of various attention mechanisms, the super-resolution reconstruction of darkfield images with less texture information is effectively realized, and, on the basis of image super-resolution, an adaptive image segmentation method is designed, which effectively adapts to the damage detection problems under conditions of uneven illumination and weak signal. An online experiment was carried out by using edge illumination and the telescope optical imaging system, and the validity of the method was proved by the experimental results.